Fatigue resistance of AlSi11 alloy plastically wedged of chips

  • Łukasz Wzorek AGH University of Science and Technology
  • Mateusz Wędrychowicz AGH University of Science and Technology
  • Tomasz Skrzekut AGH University of Science and Technology
  • Piotr Noga AGH University of Science and Technology
  • Marcel Wiewióra AGH University of Science and Technology
  • Mateusz Pacek AGH University of Science and Technology
Keywords: AlSi11, plastic consolidation, fatigue test

Abstract

Two extrudates made of AlSi11 alloy have been produced in the co-extrusion process: solid billet and machining chips from the rolling process. The microstructure was observed, mechanical properties were determined on the basis of the 1-axial stretch test, and the fatigue tests were performed to determine the fatigue resistance of the AlSi11 alloy.

References

Kosgey B.K., Maube S.E., Wangombe D.N., Maranga S.M., Kihiu J.M. “Effects of Additives on the Fatigue and Impact Properties of Recycled Al-Si Alloy Wheels”. Jomo Kenyatta University of Agriculture and Technology, 2011, s. 1–4.

Konecna R., Nicoletto G., Kunz L., Svoboda M., Baca A. “Fatigue strength degradation of AlSi12CuNiMg alloy due to high temperature exposure: a structural investigation”. Procedia Engineering. 74 (2014): s. 43–46.

Nicoletto G., Riva E., Di Filippo A. “High temperature fatigue behaviour of eutectic Al-Si-alloys used for piston production”. Procedia Engineering. 74 (2014): s. 157–160.

Fintova S., Konstantova V., Konecna R., Nicoletto G. “Experimental study of porosity and fatigue behaviour of cast Al-Si alloys”. Department of Materials Science and Engineering. 2008, s. 1–8.

Ammar H.R., Samuel A.M., Samuel F.H. “Effect of casting imperections on the fatigue life of 319-F and A356-T6 Al-Si casting alloys”. Materials Science and Engineering. 473 (2008): s. 65–75.

Maruno Y., Miyahara H., Noguchi H., Ogi K. “Notch size effect in the fatigue characteristics of Al-Si-Cu-Mg cast alloy”. Materials Transactions. 67 (2004): s. 839–843.

Noga P., Wiewióra M., Wzorek A. „Wpływ obróbki cieplnej na własności stopu AlSi11 konsolidowanego plastycznie z wiórów”. Mechanik. 7 (2017): s. 621–623.
Published
2017.11.13
How to Cite
Wzorek, Łukasz, M. Wędrychowicz, T. Skrzekut, P. Noga, M. Wiewióra, and M. Pacek. “Fatigue Resistance of AlSi11 Alloy Plastically Wedged of Chips”. Mechanik, Vol. 90, no. 11, Nov. 2017, pp. 1063-5, doi:10.17814/mechanik.2017.11.181.